Husqvarna FS 400 - Concrete Saw

The Husqvarna FS400 is an economical push saw for smaller service and repair of sidewalks, driveways and city streets. At just 276lbs it is a very portable walk behind saw. Most contractors choose the FS400 for residential type projects, where a depth of cut of just over 6 inches is needed

Notable Features

.
* Husqvarnas floor saws are robust, well designed and easy to use thanks to features as protective cage, lift bail and cutting depth indicator.
* Patent-pending raise/lower assist system, using gas spring.
* Ideal for very small road repair jobs, cutting small trenches for pipe laying and cutting in difficult-to-access job sites.
*FS400 is very good for channels for impedance loop fittings or cable laying
*Excellent for cutting Expansion Joints in concrete floors
* Very lightweight for ease of transport and handling.
* Patent-pending assisted raise/lower system using a gas spring.
* Excellent power transmission to the blade due to the Poly-V belt.
*


Accessories Spare Parts Parts Diagrams Buy Saw

Saw Specs
Weight 219lbs
Maximum Blade 18in
Maximum Depth of cut 6-5/8 inches
Bladeshaft RPM (avg) 3800 RPM
Bladeshaft Diameter 13/16 in
Arbor Size 1in with Drive Pin
(Most Common Size Available fits most stock blades)
Handle Adjusment Yes
Blade Guard Type Bolted On
Belt Type 12 Rib Poly V Belt
Blade Dept Adjustment Manual Screw Type
Rear Wheel Size 8 x 1-1/2 x 5/8
Front Wheel Size 5 x 1-1/2 x 5/8
Saw Dimensions 42in Length
20in Width
30in Height
Shipping Weight 276 lbs
Engine Specifications
Engine Manufacturer Honda GX390
Engine Fuel Gasoline
Engine Horsepower 11 HP
Displacement 23.7 cubic inches
Bore - Stroke 3.5in - 2.5in
4 Stroke Yes
Left or Right hand Cut Right Hand
Fuel Capacity 1.6 Gallons
Oil Capacity 2.3 qts
Air Filter Dry Type Dueal Element Cyclone
Starter Recoil - Pull Start
Electric Start No
Engine Cooling Air Cooled



   
Low vibration engine mount

Patent-pending low-vibration engine mount offering a greater comfort in work.
IntelliSeal

The patented IntelliSeal blade spindle has four sealed radial bearings for strength and durability. Allows for a minimum of 500 hour maintenance intervals and a 1000 hour limited warranty.
Adjustable handles

Patent-pending adjustable handles for increased operator comfort. Adjustment allows operator to be positioned closer to cutting side for easier alignment and straighter cuts. Handle can also be folded for transport.
Poly V-belt

Poly-V belts for optimum power transmission.

Husqvarna - FS 413 - 18 Inch

    MANUFACTURER: HUSQVARNA
    CODE: 965150105
    PRICE: 3550.00
    ADD TO CART or BUY ONE NOW

    Husqvarna - FS 400 - 18 Inch

      MANUFACTURER: HUSQVARNA
      CODE: 965148208
      PRICE: 2290.00
      ADD TO CART or BUY ONE NOW