Rubber Heads for Concrete Vibrators - Oztec Brand

Please Note All rubber heads are built to order, please allow

1 week for fabrication and build of these heads, before shipment.  They are not stock items.


Oztec's High Efficiency RubberHeadTM Outperforms any other type of vibrator

Epoxy coated rebar presents a particularly troublesome problem. Steel heads act like an electric hammer, striking any rebar or forms they contact, over 10,000 times per minute, with a force from hundreds to over 2,000 pounds per blow. Contact with a steel vibrator head of as little as one second can chip enough coating to subject the steel to deep rust. Oztec's patented High Efficiency RubberHeadTM vibrator head not only meets DOT non-metal head specifications for protecting coated rebar and expensive forms, but exhibit some very special and unique properties. The High Efficiency RubberHeadTM urethane dimpled construction sends strong shock waves off the entire length of the head, with a larger radius of action, producing denser concrete with less voids to patch.

Oztec's patented High Efficiency RubberHeadTM:

  • Will outperform any other type of vibrator�round, square, hi-cycle, etc�Any Type!
  • Will protect epoxy coated rebar and expensive forms.
  • Is outstanding in low slump (to 0 slump) concrete.
  • Essential in large pours of very stiff concrete. 
  • Makes concrete denser with less voids to patch.
  • Vibrates @ 12,000vpm, never drops below 10,500vpm when lowered deep into low slump concrete.
  • Provides Superior Action.
  • Is an absolute must for Architectural concrete where cosmetic surfaces are essential.
  • All Oztec vibrators meet or exceed ACI specification # 309

Why the Oztec RubberHeadTM outperforms any other type of Vibrator.
(a.) When a smooth vibrator head (round, square or any other shape) is lowered into a relatively stiff concrete batch, the front or nose of the vibrator drills a hole. It pushes away concrete faster than it can return. Result, shock waves produced mostly from the vibrator's front end.

(b.) Oztec's patented RubberHeadTM has a large number of openings which allow wet concrete to cool the inner shell. These openings act like suction cups, which keeps concrete in contact with the entire length of the vibrator head, sending strong shock waves into the mass.

                   Oztec's patented uniform, high efficiency action.

 
     
    (a.) Smooth vibrator head (b.) Oztec's patented RubberHeadTM

Oztec - 1-7/8in Rubber Head


  • This head requires the 2.4 or 3.2 motor
  • Includes Protective Sleeve and Tube of Sealant
  • Protects Epoxy Coated Rebar From Abrasions
  • Urethane Protective Rubber Coating
  • Comes With Protective Rubber Tip
  • Inner Steel Construction
  • Measures 1-7/8in
MANUFACTURER: OZTEC
CODE: HR188OZ
PRICE: 336.76
ADD TO CART or BUY ONE NOW

Oztec - 2-1/2in Rubber Head


  • This head requires the 3.2 motor
  • Includes Protective Sleeve and Tube of Sealant
  • Protects Epoxy Coated Rebar From Abrasions
  • Urethane Protective Rubber Coating
  • Comes With Protective Rubber Tip
  • Inner Steel Construction
  • Measures 2-1/2in
MANUFACTURER: OZTEC
CODE: HR250OZ
PRICE: 422.84
ADD TO CART or BUY ONE NOW

Oztec - 2-3/4in Rubber Head


  • This head requires the 3.2 motor
  • Includes Protective Sleeve and Tube of Sealant
  • Protects Epoxy Coated Rebar From Abrasions
  • Urethane Protective Rubber Coating
  • Comes With Protective Rubber Tip
  • Inner Steel Construction
  • Measures 2-3/4in
MANUFACTURER: OZTEC
CODE: HR275OZ
PRICE: 576.45
ADD TO CART or BUY ONE NOW

Oztec - 2-3/4in x 6in Rubber Head


  • This Head requires either the 2.4 or 3.2 motor
  • Includes Protective Sleeve and Tube of Sealant
  • Protects Epoxy Coated Rebar From Abrasions
  • Urethane Protective Rubber Coating
  • Comes With Protective Rubber Tip
  • Inner Steel Construction
  • Measures 2-3/4in
MANUFACTURER: OZTEC
CODE: HSR275OZ
PRICE: 340.98
ADD TO CART or BUY ONE NOW

Oztec - Rubber Tipped Steel Vibrator Head 1-1/4in


  • Rubber Tipped Steel Head
MANUFACTURER: OZTEC
CODE: H125OZ-RT
PRICE: 219.44
ADD TO CART or BUY ONE NOW

Oztec -Rubber Tipped Steel Vibrator Head 1-1/2in


  • Rubber Tipped Steel Head
MANUFACTURER: OZTEC
CODE: H150OZ-RT
PRICE: 234.63
ADD TO CART or BUY ONE NOW

Oztec - Rubber Tipped Steel Vibrator Head 1-3/4in


  • Rubber Tipped Steel Head
MANUFACTURER: OZTEC
CODE: H175OZ-RT
PRICE: 266.70
ADD TO CART or BUY ONE NOW

Oztec - Rubber Tipped Steel Vibrator Head 2in


  • Rubber Tipped Steel Head
MANUFACTURER: OZTEC
CODE: H200OZ-RT
PRICE: 293.71
ADD TO CART or BUY ONE NOW

Oztec - Rubber Tipped Steel Vibrator Head 2-1/2in


  • Rubber Tipped Steel Head
MANUFACTURER: OZTEC
CODE: H250OZ-RT
PRICE: 341.82
ADD TO CART or BUY ONE NOW

Oztec - Rubber Tipped Steel Vibrator Head - 3/4in ***For use with Pencil style shafts


  • Rubber Tipped Steel Head
  • Uses only Pencil Style Shafts
MANUFACTURER: OZTEC
CODE: HP075OZ-RT
PRICE: 124.91
ADD TO CART or BUY ONE NOW

Oztec - Rubber Tipped Steel Vibrator Head - 1in


  • Rubber Tipped Steel Head
MANUFACTURER: OZTEC
CODE: H100OZ-RT
PRICE: 146.86
ADD TO CART or BUY ONE NOW