Internet Security By ControlScan
Buy Concrete Stamps and Acid Stain

    Home
 Contact Us
 Shipping
 Policies

    International Sales
 Customer Service
 Request Catalog


Checkout 
Home > Concrete Vibrators > Oztec Rubberhead Vibrators
New Page 3
RubberHeadTM 

Oztec's "High Efficiency RubberHeadTM" Outperforms any other type of vibrator

Epoxy coated rebar presents a particularly troublesome problem. Steel heads act like an electric hammer, striking any rebar or forms they contact, over 10,000 times per minute, with a force from hundreds to over 2,000 pounds per blow. Contact with a steel vibrator head of as little as one second can chip enough coating to subject the steel to deep rust. Oztec's patented High Efficiency "RubberHeadTM" vibrator head not only meets DOT non-metal head specifications for protecting coated rebar and expensive forms, but exhibit some very special and unique properties. The High Efficiency "RubberHeadTM" urethane dimpled construction sends strong shock waves off the entire length of the head, with a larger radius of action, producing denser concrete with less voids to patch.

Oztec's patented "High Efficiency RubberHeadTM":

  • Will outperform any other type of vibrator…round, square, hi-cycle, etc…Any Type!
  • Will protect epoxy coated rebar and expensive forms.
  • Is outstanding in low slump (to "0" slump) concrete.
  • Essential in large pours of very stiff concrete. 
  • Makes concrete denser with less voids to patch.
  • Vibrates @ 12,000vpm, never drops below 10,500vpm when lowered deep into low slump concrete.
  • Provides Superior Action.
  • Is an absolute must for Architectural concrete where cosmetic surfaces are essential.
  • All Oztec vibrators meet or exceed ACI specification # 309

Why the Oztec "RubberHeadTM" outperforms any other type of Vibrator.
(a.) When a smooth vibrator head (round, square or any other shape) is lowered into a relatively stiff concrete batch, the front or nose of the vibrator drills a hole. It pushes away concrete faster than it can return. Result, shock waves produced mostly from the vibrator's front end.

(b.) Oztec's patented "RubberHeadTM" has a large number of openings which allow wet concrete to cool the inner shell. These openings act like "suction cups", which keeps concrete in contact with the entire length of the vibrator head, sending strong shock waves into the mass.

                   Oztec's patented uniform, high efficiency action.

 
     
    (a.) Smooth vibrator head (b.) Oztec's patented "RubberHeadTM"

Oztec Rubberhead Vibrators




Oztec - 1-7/8in Rubber Head Concrete Vibrator
Code:HR188OZ
Price: $319.20
Quantity in Basket: none
 



Oztec - 2-1/2in Rubber Head Concrete Vibrator
Code:HR250OZ
Price: $400.80
Quantity in Basket: none
 



Oztec - 2-3/4in Rubber Head Concrete Vibrator
Code:HR275OZ
Price: $546.40
Quantity in Basket: none
 



Oztec - 2-3/4in x 6in Rubber Head Concrete Vibrator
Code:HSR275OZ
Price: $323.20
Quantity in Basket: none
 



Oztec - Rubber Tipped Steel Vibrator Head - 3/4in ***For use with Pencil style shafts
Code:HP075OZ-RT
Price: $118.40
Quantity in Basket: none
 



Oztec - Rubber Tip for 1in Steel Heads
Code:HP100OZ-RT
Price: $139.20
Quantity in Basket: none
 



Oztec - Rubber Tip for 1-1/4in Steel Heads
Code:H125OZ-RT
Price: $208.00
Quantity in Basket: none
 



Oztec - Rubber Tip for 1-1/2in Steel Heads
Code:H150OZ-RT
Price: $222.40
Quantity in Basket: none
 



Oztec - Rubber Tip for 1-3/4in Steel Heads
Code:H175OZ-RT
Price: $252.80
Quantity in Basket: none
 



Oztec - Rubber Tip for 2in Steel Heads
Code:H200OZ-RT
Price: $278.40
Quantity in Basket: none
 



Oztec - Rubber Tip for 2-1/2in Steel Heads
Code:H250OZ-RT
Price: $324.00
Quantity in Basket: none
 

©Concrete Supply House 2004